辽宁恒润石油化工有限公司是中国良好的工业化学品进口批发服务商,专业致力于为客户提供高效便捷的服务,我司与国外70多家品牌生产商代理商建立长期的战略合作伙伴关系,能够快速帮助客户解决实际问题正品保证、并且长期稳定为客户储备库存,节约客户等货时间。涉及行业油:汽车行业、矿山行业、风电行业、纺织行业、石油开采、轨道交通、食品医疗、电子行业、船舶制造与维护保养、航空航天、电机轴承、润滑系统、仪器行业。公司代理经销品牌有:瑞士摩托瑞斯MOTOREX、尼科NYCO、克鲁伯KLUBER、摩力克MOLYKOTE、魔力多MOLYDUVAL、科路德KLUTHE、福斯FUCHS、潘东兴PENTOSIN、阿维亚AVIA、安润龙ANDEROL、亚拉ARAL、雪弗龙Chevron、赤士顿CHESTERTON、、LE、劳勃抗LUBCON、好富顿HOUGHTON、嘉实多Castrol、魔力大MOLYDAL、罗哥ROCOL、凯密特尔Chemetall、等品牌润滑油、润滑脂、防锈油、磨削液、切削液、锂基脂等。
公司官网:www.ruibolube.con 咨询热线:
HOUGHTON RUST VETO NTP 32
专为测试和保护液压系统而设计的防腐油。
RUST VETO NTP 32是矿物油和精心挑选的添加剂的混合物,可提高防锈和防磨损效果,为内部系统组件提供持久的防腐蚀保护。
RUST VETO NTP 32油有效地作用于黑色金属和有色金属。
应用
RUST VETO NTP 32是一种双用途液体,设计用于调试和储存基于水和乙二醇或基于矿物油的液压系统。
RUST VETO NTP 32是一种矿物油基产品,粘度为ISO 32,具有*液压油的所有特性,可防止磨损。特别补救措施
开发用于与乙二醇混合。
存储保护程序:
将RUST VETO NTP 32倒入系统,达到工作水平,并使设备投入运行。
将RUST VETO NTP 32填满,密封并存储系统。
基于矿物油的系统恢复运行:排空系统并添加合适的液压油。
返回基于水和乙二醇的操作系统以从系统中排出液体,用水 - 乙二醇混合物冲洗一次。排出混合物并加入淡水 - 乙醇酸液体。
优点
具有成本效益 - 抗磨损特性,可以调试液压设备。
盈利能力 - 与基于矿物油的液压油完全兼容。
盈利性 - 在矿物油的基础上很容易用液压油冲洗掉;沉淀物会被乳化,不会影响效率,让您不必花钱反复洗涤。
操作员的安全 - 高点火温度和低挥发性,以限度地降低运输和储存过程中的火灾风险。
质量 - 防止盐水进入。
建议使用
RUST VETO NTP 32以纯净形式供应和使用。
存储
有关运输和储存规则以及产品保质期的信息,请参见相关产品安全数据表*7节。产品应存放在密闭容器中,置于干燥,清洁的地方,避免受凉。除非另有说明,否则建议的储存温度在5°C至40°C之间。为确保定期供应,请使用库存。
典型的物理特性
RUST VETO NTP 32
外观透明橙棕色
比重0.9
打开坩埚中的闪点(°С)180
运动粘度在40°C,(cSt)32
薄膜厚度(微米)
给定物理化学参数的值对于当前制造的产品是典型的。将来,它们可能会根据Houghton规范的要求进行更改。
RUST VETO NTP 32
Corrosion protection oil specially designed to test and protect hydraulic systems.
RUST VETO NTP 32 is a blend of mineral oil and carefully selected additives to increase the effectiveness of rust and wear protection, providing long-lasting protection of internal system components from corrosion.
RUST VETO NTP 32 oil effectively acts on ferrous and non-ferrous metals.
Application
RUST VETO NTP 32 is a dual purpose fluid designed for commissioning and storing hydraulic systems based on water and glycol or based on mineral oil.
RUST VETO NTP 32 is a mineral oil-based product with a viscosity of ISO 32, which has all the properties of a first-class hydraulic oil for protection against wear. Remedy specially
developed for mixing with glycol.
Storage Protection Procedure:
RUST VETO NTP 32 into the system to the working level and put the equipment into operation.
Fill RUST VETO NTP 32 to full, seal and store the system.
Mineral oil based systems return to operation: drain the system and add suitable hydraulic oil.
Returning to operation systems based on water and glycol to drain the liquid from the system, rinse once with water-glycol mixture. Drain the mixture and add fresh water-glycolic liquid.
Benefits
Cost-effective - anti-wear characteristics that allow the commissioning of hydraulic equipment.
Profitability - full compatibility with hydraulic fluids based on mineral oils.
Profitability - it is easily washed off with hydraulic fluids on the basis of mineral oils; sediments are emulsified and do not affect the efficiency, allowing you not to spend money on repeated washing.
Safety for the operator - high ignition temperature and low volatility to minimize the risk of fire during transportation and storage.
Quality - protection against the ingress of salt water.
Recommendations for use
RUST VETO NTP 32 is supplied and used in its pure form.
Storage
Information on the rules of transportation and storage, as well as the shelf life of the product can be found in section 7 of the Safety Data Sheet of the relevant product. The product should be stored in a closed container in a dry, clean place protected from cold. The recommended storage temperature is between 5 ° C and 40 ° C unless otherwise indicated. To ensure regular supply, use stockpiles.
Typical physical properties
RUST VETO NTP 32
Appearance transparent orange brown
Specific gravity 0.9
Flash point in open crucible (° С) 180
Kinematic viscosity at 40 ° C, (cSt) 32
Film thickness (microns)
The values of the given physicochemical parameters are typical for the currently manufactured products. Further, they may be changed in accordance with the requirements of the Houghton specifications.